Steinberg announced a new plug-in package – Yamaha Vintage Plug-in Collection. Create accurate digital replica analog world-class audio equipment has always been a desirable goal – to those long as the Yamaha, the largest and most successful manufacturer in the world of high-quality musical instruments, has introduced a revolutionary technology that allows you to create highly accurate… Read More »
AB_LM (AB Loudness Match) is a gain control which enables level matched and sample accurate A/B comparison of FX chains. Features: match pre and post-FX loudness. match pre-FX loudness with reference level. 3 loudness match modes: manual, auto and gain stage. FX chain drive. up to 256 sender/receiver pairs including auto channel set/link. automatic latency measurement/compensation.… Read More »
gEQ12 is a 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Features: 12 independent filter bands, extended frequency range 10Hz – 48kHz. 17 filter types, analogue/digital design, zero delay IIR. filter slope up to 96dB. independent stereo/left/right/mid/side processing per band. 7 processing modes: zero latency, minimum/linear phase. stereo/MS processing (eg. stereo/mono split for… Read More »
Production Bundle is a suite of signal processing plug-ins that let you stop recording and start making records. With all the critical tools you need to shape, tame, manipulate, and master your tracks, it is the essential audio engineering toolset that no one should be without. The Production Bundle includes 8 fantastic sounding plugins that will help you… Read More »
Side Filter is an High Pass filter focused on removing bass frequencies from the Side portion of a stereo mix. This filter is very useful to tighten up the low end of your mix or to help you prepare a vinyl ready master. Features: Butterworth and Bessel filter designs. HPF Frequency range: 12 steps from 12Hz to 1kHz.… Read More »
The TS-1 is a multimode frequency dependent transient shaper designed to manage the attack and sustain of an incoming audio signal. TS-1 features two separate detection circuits for Attack and Sustain, whose signals can be filtered to improve the detection (SC filtering) or to color the processed audio. Due to its level independent nature, you don’t need… Read More »
BOUNCE is a transparent yet versatile compressor that can do subtle compression to full thrusting and punchy sounds. Featuring a Detection Section, where you can select the frequency band (range) which you can feed back into the compressor to create the desired shape of your sound.
AGENT is fundamentally a configurable virtual control surface for effects. With AGENT you gain control of your entire effects chain in a single interface. AGENT has a Channel Strip page and an Effects Rack page. They are essentially identical but we designed them to work together the way a rack of outboard effects would interact with a… Read More »
Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end… Read More »
Blue Cat’s PatchWork is a universal plug-ins patchbay that can host up to 64 VST or AU plug-ins into any Digital Audio Workstation (DAW) in one instance. It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations… Read More »
The MPX Native Reverb Plug-in delivers the Lexicon sound through a single polymorphic plug-in with seven different reverb types and over one hundred versatile and finely crafted studio presets. Features at a Glance: Classic Lexicon reverb algorithm. 100 finely-crafted studio presets. Exclusive artist presets. Intuitive user-interface provides easy access to key parameters. Formats that work seamlessly in… Read More »
DMG Audio Compassion 1.15 – a full-featured processor for dynamic processing of any audio material. For this interface lies perhaps the most flexible dynamic engine ever created. DMG Audio Dualism 1.04 – a powerful tool for working with stereo signals, comprising an integrated visualization system audio. It used as the final step in the mix and mastering.… Read More »
MORPH 2 is a real-time plug-in for structural audio morphing, the sonic equivalent of one object slowly changing its shape to become a different object – for example, one face becoming (“morphing” into) another. MORPH creates seamless morphing transitions, hybrid sounds that combine aspects of existing ones, physically impossible instruments, unique creature and robot voices, talkbox-like effects,… Read More »
Frostbite is a multi-effect plugin featuring Ring Modulator, Feedback, and Freeze modules. It’s aimed at ambience and cinematic music, but can also be used for extreme sonic experiments. The Signal Flow is flexible with 6 different combinations. The Ring Modulator multiplies your input signal with a Sine wave (with frequency up to 4kHz). You can also reduce… Read More »
Positive Grid – BIAS is the most accurate, up-designed and versatile guitar amp model in the world. Its advanced simulation engine AMP-captures the warmth and feel of a real tube amp in every aspect, component by component. To begin with, the plugin includes 36 authentic models of the most sought-after vintage and modern amps rock ‘n’ roll history.… Read More »
Over the last several years, a range of high processing powered digital guitar effects and mobile guitar apps have changed the way millions of guitarists play and record. The question is how we can create new tools to maximize the sound quality with today’s technology. The result is BIAS FX. It’s designed from the ground up with no-compromise… Read More »
Fog Convolver is a convolution plugin that applies the sonic character of an impulse response to another sound in real time. Fog Convolver can be used to add reverberation, create special effects, and apply an acoustic impulse captured from audio equipment. The factory bank features more than 250 impulse responses made from spaces, analog and digital equipment, speakers,… Read More »
OverTone DSP – Plug-in Bundle 2016 Contents : OverTone.DSP.AF2-10.Bundle.v2.4.4.WIN.OSX.LINUX – Universal graphic equalizer with a wide range, zero latency, modeled by an analog device and FFT display. OverTone.DSP.DYN500.v2.3.1.WIN.OSX.LINUX – quality compressor / dynamics processor designed for use on mono or stereo channels. The plugin provides soft compression, combined with a light overdrive style tape saturation. OverTone.DSP.DYN4000.v2.3.1.WIN.OSX.LINUX… Read More »
Altiverb is a sampled acoustics Reverb plugin for that offers realistic one, two and four channel sampled acoustics of real halls, cathedrals, bathrooms and virtually any real acoustic environment. Included are dozens of acoustic samples ranging from the Amsterdam Concertgebouw to bathrooms and closets. Altiverb also lets you sample acoustic spaces – or hardware reverbs – on… Read More »
LA xLimit II is an advanced look ahead, wideband, linked-stereo limiter including ISP detection and oversampling. The goal of the design was to cover a broad range of limiting applications in today’s mixing and mastering situations with strong focus on low aliasing. Features: state of the art low aliasing look ahead limiter design. freely adjustable character. detailed transient… Read More »
gEQ12 is a 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Features: 12 independent filter bands, extended frequency range 10Hz – 48kHz. 17 filter types, analogue/digital design, zero delay IIR. filter slope up to 96dB. independent stereo/left/right/mid/side processing per band. 7 processing modes: zero latency, minimum/linear phase. stereo/MS processing (eg. stereo/mono split… Read More »
A.O.M. is a professional audio software bundle. Includes: Invisible Limiter – transparent mastering limiter Stereo Imager D – true-stereo image manipulator Wave Shredder – waveform destruction tranQuilizr – transparent equalizer Cyclic Panner – Axis transformation panner Changelog (v1.75) A.O.M. has updated all their plug-ins to version 1.7.5 New features and enhancements: [Mac OS X] Enable precise step… Read More »
EBusLim is a brickwall peak limiter and loudness maximization plug-in, available in AudioUnit, VST and VST3 plug-in formats (including native 64-bit support) for Mac OS X (v10.5 and later) and Windows computers. EBusLim implements a single EL-4-based limiter mode originally designed in Elephant mastering limiter plug-in. This mode is suitable for bus, drum bus, master bus and… Read More »
Featuring full loudness metering and DMGAudio’s algorithms this is not your traditional dynamics processor. Limitless implements multi-band dual-stage processing that intelligently separates dynamics and transients, and generates the smoothest possible gain reduction curves. Overview: Peak limiter to complete your mastering chain. Iterative solver algorithm provides the gentlest, most transparent limiting. Dual-stage dynamic handling separates transients and dynamics.… Read More »
AIR is excited to announce the Creative FX Collection Plus. This world-class new collection includes our twenty classic AIR FX plugins for the first time in AU/VST Formats plus eight all-new FX (AU/VST/AAX), expertly created by our team based on extensive feedback and requests from customers. This exclusive and diverse collection provides all you need for creative… Read More »
