Year/Date of Issue: 04/27/23
Developer: Nembrini Audio.
Developer site: Nembrini Audio
Format: VST, VST3, AAX.
Bit depth: 64bit
Tabletka: Cured [R2R]
System requirements: WIN 7+
Description:
Nembrini Audio was born in 2019 thanks to the experience of Igor Nembrini, who has been creating some of the most famous guitar amp plug-ins on the market for well-known companies for over ten years.
Nembrini Audio specializes in the digital reproduction of analog saturation circuits using its own patented hybrid technology and Igor Nembrini’s experience as a professional session musician and demonstrator.
Emulations begin with accurate digital reproduction of analog circuits, the dynamic behavior of each component being carefully modeled and fine-tuned by ear to achieve the highest fidelity of the original sound and the most musical and creamy analog tone in the digital world that only a musician can achieve.
EK Edstortion Bundle v1.0.5:
Like the original F-Pedals famous Eddie Kramer Edstortion-Pedal, the plugin features 3 classic distortion modes based on Eddie Kramer’s legendary work with Jimi Hendrix, Led Zeppelin, Rolling Stones, The Beatles, Traffic and more.
EK Phazevibe Bundle v1.0.3:
The Eddie Kramer+Phazevibe pedal from F-Pedals is very unique in that it is not a clone of anything else.
FA Echoband Bundle v1.0.3:
Modeled after the original F-Pedals Echobandit, a combination of gold and silver editions with some extra features.
8180v1.0.4:
The 8180 Monster Tube Guitar Amplifier is the benchmark for heavy and rock guitar sounds. If you’re looking for a modern and rich high-gain tone perfect for the most aggressive rock and metal genres, then your search ends here!
Acoustic Voice v1.0.1:
Based on creative techniques developed by studio engineers and producers, the Accoustic-Voice preamp plug-in combines guitar simulation, studio preamps and microphones, modulation, delay and reverb to create the most advanced acoustic soundscapes.
Analog Rack Bundle v2.0.6:
Nembrini Audio has taken the analog and digital effects pedals most favored by guitarists and repackaged them into new rack-style plug-ins that are easy to use and extremely powerful at the same time, with the addition of a proprietary virtual tube preamp circuit that colorizes the signal in a very special way.
Bass Driver v1.0.0:
SansAmp Bas-Driver DI*-based 3-band overdrive/amp simulator with parametric crossovers to dramatically change bass tone and achieve modern balance and texture.
Blackice Beta Gamma v1.0.3:
Darkglass Alpha Omega 900* based bass head with a virtual recording chain worthy of the best recording studios.
BST100 V2 v1.0.2:
Introduced in 1987, this iconic amp has found a place in every genre of setup, from screaming metal to pop.
Cali Dual v1.0.5:
Three Channel Guitar Amp The 100 watt head can run from the purest clean sounds to an incredible crushing wall of amplification. It is modeled after the Mesa Boogie Dual Rectifier*.
Cali Reverb v1.0.7:
The Modern High Gain Amplifier plugin is modeled after a 50-watt Mesa Boogie Rectoweb* head.
Delay3000 v1.2.2:
Inspired by the Roland SDE-3000 rack rack* and Strymon Timeline*, the DELAY-3000 Vintage Modern Repeater plug-in adds new features and an easy-to-use user interface, putting a full arsenal of delay effects at your fingertips!
Doubler v1.0.0:
Designed to enhance a guitar, vocal or polyphonic instrument with a natural doubling effect, adding richness and depth.
EN Hardball v1.0.0:
Pure, uncompromising metal amp plug-in. This is the way of modern metal! But EN Hardball also produces crystal clear Clean tones, crunchy Crunch, tight solo sounds and everything in between.
Faceman v1.0.1:
Based on a vintage 1967 “blackface” Fender Bassman with a rare 1×15 cabinet and JBL* D130F speaker provided by Rock ‘n’ Vintage musical instruments.
Hivolt 103 v1.0.1: Based on a vintage 1970 Hiwatt* DR103 with original Partridge transformer and point-to-point military wiring, provided by Rock ‘n’ Vintage musical instruments.
IR Loader v1.0.1: An innovative and complete impulse response loader specially designed to load your favorite cabinet IRs.
JMP Pro v1.0.1: Based on the Marshall JMP1* preamp, it delivers pure tone to each of four uniquely sounded channels OD1, OD2, Clean1 and Clean2.
LoFi v2.0.1: The Vintage Clipper plugin is designed to add grain and heaviness to your mix with two distinctive custom designed saturation algorithms.
MP1 Pro v1.0.1: ADA based MP1* preamplifier features Tri-State Voicing, allowing you to choose between Distortion Tube, Clean Tube, and Solid State virtual circuits.
MRH159 v1.0.1: A guitar amp modeled after a vintage Marshall Super Lead 1959* 100W, one of the most famous amps in history. The Super Lead 100W on two 4×12 cabs is still the ideal rock setup for many players.
MRH810 V2 v1.0.2: Modeled after Marshall JCM800 2210*. This legendary head is one of the most iconic amps in rock history.
Overdrive Special v1.0.0: Based on OverdriveSpecial By Dumble* #124. This is a two-channel amplifier that includes a clean channel and an overdrive channel.
Plugin Rig v1.2.2: This is the perfect environment for the modern guitar player who wants to create and organize their entire chain of guitar amps and Fx in one plugin.
PSA1000 Bundle v1.2.5: A modern recreation of the classic 90s analog guitar preamp used in recording studios around the world!
Quinta v1.0.3: The Pitch Machine plugin is more than a standard octave as it not only gives you notes an octave up and an octave down, but also a fifth up.
Sound Master v1.0.6: Modeled after a 100-watt, all-tube Fender Tone Master* Custom Shop handcrafted, point-to-point, all-tube head, the SoundMaster Custom Tube guitar amplifier is a tone lab
plug-in capable of reproducing classical guitar sounds and more.
The-Boss Bundle v1.2.2: Based on the Marshall Guv’nor* pedal, the first amp-in-a-box pedal that reproduces the tone and distortion character of famous black and gold British guitar amps.
Voice DC30 v1.0.3: Modeled after the vintage VOX AC30 Top Boost Reverb, characterized by its “ringy” high-frequency sound, which is widely acclaimed by British musicians and others.
PLUGIN RIG Setup
To use the Nembrini Audio plugins in the NA Plugin Rig, you need to install the VST3 format plugins.
You also need to set the path to the VST3 plugins in the NA Plugin Rig settings.
Our installer places the VST3 plugin in “%COMMONPROGRAMFILES%\VST3\Nembrini Audio”.
