OwnHammer – Impulse Response Libraries – AMPG BASS (WAV)

By | March 18, 2023

 

Publisher : OwnHammer
Website : ownhammer.com
Format : WAV
Quality : 24 bit 44.1, 48, 88.2, 96 kHz mono


Description :
High quality guitar impulses with sample rates of 44.1, 48, 88.2, and 96 kHz

Content :

7035 WAV files
CABINET
210 AMPG is based on an Ampeg SVT-210AV 2×10 cabinet.
410 AMPG is based on an Ampeg SVT-410HLF 4×10 cabinet.
THE SINGLE SPEAKERS AND MULTI-SPEAKER COMBINATIONS
‘AVT-10’ The AVT-10 is based on a 2014 Eminence 0810041 for Ampeg, the stock speaker in the SVT-210AV.
‘BL-10X’ The BL-10X is based on a 2010 Celestion BL10-200X.
‘BN-10S’ The BN-10S is based on a 2009 Celestion BN10-200S.
‘J10-CQ’ The J10-CQ is based on a 1968 Jensen C10Q.
‘J10-PR’ The J10-PR is based on a 1968 Jensen P10R.
‘OH-UK’ The OH-UK is based on a multi-speaker collage consisting of the BL-10X and BN-10S.
‘OH-US’ The OH-US is based on a multi-speaker collage consisting of the J10-CQ and J10-PR.
‘OH-XVT’ The OH-XVT is based on a multi-speaker collage consisting of the AVT-10 and SVT-10.
‘SVT-10’ The SVT-10 is based on a 2000 Eminence 10401A for Ampeg, the stock speaker in the SVT-410HLF.
MICS
CUT Voicing
CND • based on a Mojave MA-200 tube condenser microphone
DYN • based on a vintage Telefunken MD421 dynamic microphone
RBN • based on a Beyerdynamic M160 ribbon microphone
FAT Voicing
CND • based on a Microtech Gefell UMT70S condenser microphone
DYN • based on a Beyerdynamic M88 dynamic microphone
RBN • based on a Royer R121 ribbon microphone
Auxiliary Captures
PORT • based on a vintage Neumann KM84 condenser microphone
ROOM • based on a vintage Neumann KM84 condenser microphone
SUB • based on a Yamaha SubKick dynamic microphone

Wave audio format IR’s (.wav) are compatible with convolution reverb type loaders in recording software and outboard hardware units and are provided in:
24 bit resolution
44.1, 48, 88.2, and 96 kHz sample rates
mono channel count
minimum phase transformed (“Mpt”) and non-minimum phase transformed
200 and 500 ms decay tail lengths

For added convenience, .wav files appropriate for conversion or submission to the following platforms have been separated out and designated within the library structure:
Atomic Amplifire
Fractal Audio Systems hardware/software
Kemper Profiling Amp
Line 6 Helix
Two Note hardware

KNOW YOUR PLATFORM’S FILE FORMAT!
THIS LIBRARY CONTAINS .WAV FORMAT FILES ONLY.


Leave a Reply