Acon Digital Equalize is a parametric equalizer plug-in that combines unique features with excellent workflow and an intuitive user interface. Unlike other equalizers, you can freely adjust not only center frequency, gain and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per… Read More »
Steinberg announced a new plug-in package – Yamaha Vintage Plug-in Collection. Create accurate digital replica analog world-class audio equipment has always been a desirable goal – to those long as the Yamaha, the largest and most successful manufacturer in the world of high-quality musical instruments, has introduced a revolutionary technology that allows you to create highly accurate… Read More »
AB_LM (AB Loudness Match) is a gain control which enables level matched and sample accurate A/B comparison of FX chains. Features: match pre and post-FX loudness. match pre-FX loudness with reference level. 3 loudness match modes: manual, auto and gain stage. FX chain drive. up to 256 sender/receiver pairs including auto channel set/link. automatic latency measurement/compensation.… Read More »
gEQ12 is a 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Features: 12 independent filter bands, extended frequency range 10Hz – 48kHz. 17 filter types, analogue/digital design, zero delay IIR. filter slope up to 96dB. independent stereo/left/right/mid/side processing per band. 7 processing modes: zero latency, minimum/linear phase. stereo/MS processing (eg. stereo/mono split for… Read More »
AGENT is fundamentally a configurable virtual control surface for effects. With AGENT you gain control of your entire effects chain in a single interface. AGENT has a Channel Strip page and an Effects Rack page. They are essentially identical but we designed them to work together the way a rack of outboard effects would interact with a… Read More »
Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end… Read More »
Blue Cat’s PatchWork is a universal plug-ins patchbay that can host up to 64 VST or AU plug-ins into any Digital Audio Workstation (DAW) in one instance. It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations… Read More »
DMG Audio Compassion 1.15 – a full-featured processor for dynamic processing of any audio material. For this interface lies perhaps the most flexible dynamic engine ever created. DMG Audio Dualism 1.04 – a powerful tool for working with stereo signals, comprising an integrated visualization system audio. It used as the final step in the mix and mastering.… Read More »
OverTone DSP – Plug-in Bundle 2016 Contents : OverTone.DSP.AF2-10.Bundle.v2.4.4.WIN.OSX.LINUX – Universal graphic equalizer with a wide range, zero latency, modeled by an analog device and FFT display. OverTone.DSP.DYN500.v2.3.1.WIN.OSX.LINUX – quality compressor / dynamics processor designed for use on mono or stereo channels. The plugin provides soft compression, combined with a light overdrive style tape saturation. OverTone.DSP.DYN4000.v2.3.1.WIN.OSX.LINUX… Read More »
LA xLimit II is an advanced look ahead, wideband, linked-stereo limiter including ISP detection and oversampling. The goal of the design was to cover a broad range of limiting applications in today’s mixing and mastering situations with strong focus on low aliasing. Features: state of the art low aliasing look ahead limiter design. freely adjustable character. detailed transient… Read More »
gEQ12 is a 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Features: 12 independent filter bands, extended frequency range 10Hz – 48kHz. 17 filter types, analogue/digital design, zero delay IIR. filter slope up to 96dB. independent stereo/left/right/mid/side processing per band. 7 processing modes: zero latency, minimum/linear phase. stereo/MS processing (eg. stereo/mono split… Read More »
The Total Bundle is a set of all FabFilter plug-ins. With this bundle, you get the best EQ, compressor, limiter, de-esser, gate/expander, multi-band distortion, stereo delay, filter and synthesizer plug-ins available today. Contents : FabFilter Micro – v1.15 FabFilter One – v3.25 FabFilter Pro-C – v2.02 FabFilter Pro-DS – v1.06 FabFilter Pro-G – v1.15 FabFilter Pro-L –… Read More »
EBusLim is a brickwall peak limiter and loudness maximization plug-in, available in AudioUnit, VST and VST3 plug-in formats (including native 64-bit support) for Mac OS X (v10.5 and later) and Windows computers. EBusLim implements a single EL-4-based limiter mode originally designed in Elephant mastering limiter plug-in. This mode is suitable for bus, drum bus, master bus and… Read More »
Featuring full loudness metering and DMGAudio’s algorithms this is not your traditional dynamics processor. Limitless implements multi-band dual-stage processing that intelligently separates dynamics and transients, and generates the smoothest possible gain reduction curves. Overview: Peak limiter to complete your mastering chain. Iterative solver algorithm provides the gentlest, most transparent limiting. Dual-stage dynamic handling separates transients and dynamics.… Read More »
Voxengo has released PrimeEQ, a parametric equalizer plug-in for Mac OS X and Windows in VST2, VST3 and AU plugin formats. PrimeEQ was designed to be the first equalizer to reach for when track or mix equalization is necessary: just insert the plug-in, put and drag the control points to the desired positions. PrimeEQ implements an optimized… Read More »
TBProAudio announces dEQ6, a 6 band stereo/MS dynamic equalizer with high quality oversampling and accurate spectrum analyzer. dEQ6 offers following features: 6 independent filter + compressor/expander 3 filter types, analogue design, minimal phase, zero delay many comfort functions to setup multiple bands stereo/MS processing side chain support sample rates up to 192 kHz “real” over sampling, up to… Read More »
Audio Assault has released HeadCrusher, an analog saturation VST, AU, RTAS and AAX plug-in for Mac OS X and Windows intended to allow a user to go from subtle warmth to full on destruction. It is designed to give power to drums, make vocals stand out or just take a sound to the max. HeadCrusher comes with… Read More »
The FabFilter Pro-Q 2 equalizer plug-in combines high sound quality and a gorgeous, innovative interface with unrivalled ease of use. Effortlessly sculpt your sound FabFilter Pro-Q 2 is designed to help you achieve your sound in the quickest way possible. Via the large interactive EQ display, you can create bands where you need them and select and… Read More »
FabFilter Pro-C 2 is a major update to the FabFilter Pro-C compressor plug-in. Five brand-new compression styles make Pro-C 2 even easier to set up and more effective in common scenarios such as vocal processing, mastering or EDM pumping. It’s like getting five new compressors. Together with an abundance of new features, such as lookahead, range, hold, side-chain… Read More »
Softube develops both hardware and software for the audio industry. A number of high-end computer recording plug-ins are available under the Softube brand and the company has done development for reputable companies such as Marshall (Marshall JMD:1 Amplifier), Fender (Fender Runaway Pedal), Abbey Road Studios, Native Instruments, Ableton (Ableton Amp) and TC Electronic, as well as partnering… Read More »
